FREE Shipping on orders over $100 (US orders only)

  • Proven Reliability

    in extreme environments

  • Engineered for

    mission-critical applications

  • Trusted across

    demanding sectors

  • Built to perform

    where failure isn’t an option

DTHD Series Connectors Explained

Deutsch DTHD Series connectors guide covering Size 12, Size 8 and Size 4 single-circuit connectors

Connector Family Guide

DTHD connectors are single-position Deutsch connectors designed for heavy-duty power connections where one larger electrical circuit needs a sealed, serviceable connector rather than a multi-position housing.

The DTHD Series is available around Size 12, Size 8 and Size 4 contact systems. That makes Deutsch DTHD useful when the application calls for a single higher-power circuit but still needs a disconnectable plug-and-receptacle connection.

This guide explains what DTHD Series connectors are, how the Size 12, Size 8 and Size 4 versions differ, how DTHD plug and receptacle part numbers work, and what to check before ordering housings and contacts.

Quick Answer: What Are DTHD Connectors?

DTHD connectors are single-position Deutsch connectors for heavy-duty power connections. The family uses one electrical contact per housing and is available in Size 12, Size 8 and Size 4 contact configurations.

DTHD housings are available as plug and receptacle halves, allowing a single power circuit to remain sealed, disconnectable and serviceable rather than being permanently spliced.

Quick Deutsch DTHD Series overview.
DTHD feature What it means Selection note
Connector type Single-position connector family Designed around one electrical circuit per housing.
Contact sizes Size 12, Size 8 and Size 4 Choose the exact housing and contact size required for the circuit.
Housing styles Plug and receptacle Both mating halves need compatible contact size and configuration.
Typical role Single-circuit power connection Useful where one larger circuit needs a removable connector.
Browse DTHD Series connectors

What Are DTHD Connectors?

The Deutsch DTHD Series is a single-terminal connector system. Unlike multi-position connector families that carry several circuits through one housing, each DTHD housing is built around one electrical contact.

That makes DTHD a useful option when the design needs a single circuit Deutsch connector rather than a multi-way connector such as DT, DTM or DTP.

The family is available around three contact sizes:

  • Size 12
  • Size 8
  • Size 4

These contact-size options let the DTHD family cover different single-circuit power requirements while keeping the same general single-position connector concept.

Key point: DTHD is not simply a larger DT connector. It is a separate single-position connector family designed around Size 12, Size 8 or Size 4 contacts.

DTHD Size 12, Size 8 and Size 4 Connectors

The main DTHD selection decision is usually the contact size. DTHD housings are built around Size 12, Size 8 or Size 4 contacts, and the plug, receptacle and terminals need to match that contact system.

DTHD Series options by contact size.
DTHD contact size Connector role Selection note
Size 12 Single-circuit DTHD connection using Size 12 contacts Choose Size 12 plug, receptacle and compatible contacts as one system.
Size 8 Single-circuit DTHD connection using Size 8 contacts Requires Size 8 DTHD housings and compatible Size 8 contacts.
Size 4 Single-circuit DTHD connection using Size 4 contacts Requires Size 4 DTHD housings and compatible Size 4 contacts.

Do not treat Size 12, Size 8 and Size 4 as interchangeable housing options. The contact size is part of the connector configuration, so both mating halves and the contacts need to match.

If you are unsure what “Size 12,” “Size 8” or “Size 4” means, read Deutsch Connector Sizes Explained. Contact size refers to the electrical contact system rather than the number of positions or the outside dimensions of the connector.

Why DTHD Is a Single-Circuit Deutsch Connector

DTHD housings have one contact position. That distinguishes the family from multi-position connector systems such as DT, DTM and DTP.

A single-position connector can be useful when one power conductor needs to be disconnected independently from the rest of the harness. Instead of routing that circuit through a larger multi-way connector, the circuit can use its own DTHD plug and receptacle pair.

Single-circuit DTHD compared with multi-position connector systems.
Connector approach Number of circuits Better suited to
DTHD 1 circuit per housing A single heavy-duty power connection.
DT / DTM / DTP Multiple position options Several circuits grouped into one connector housing.

The key selection question is therefore not simply “Do I need a larger connector?” It is:

Do I need one larger power circuit on its own, or several circuits together in one housing?

DTHD Plug vs Receptacle

DTHD uses separate plug and receptacle housings to create a mating connection.

In the DTHD part-number structure, the common housing-style codes are:

  • 04 — receptacle
  • 06 — plug

As with other Deutsch connector families, plug/receptacle describes the housing, while pin/socket describes the electrical contact configuration.

Common DTHD housing and contact terminology.
Code or term Meaning Selection check
04 Receptacle housing Confirm contact size and pin/socket configuration.
06 Plug housing Confirm the compatible mating receptacle.
P Pin-contact configuration Requires the compatible mating socket configuration.
S Socket-contact configuration Requires the compatible mating pin configuration.

Do not choose the mating half from the words “plug” or “receptacle” alone. The contact size and pin/socket configuration also need to match correctly.

How DTHD Part Numbers Work

A DTHD part number can tell you several important things about the housing. A common format follows this pattern:

DTHD06-1-4S

DTHD = connector family
06 = plug housing
1 = single position
4 = Size 4 contact system
S = socket-contact configuration

The same logic can be used when reviewing other DTHD configurations:

DTHD part-number elements.
Part-number element What it identifies Example
DTHD Connector family DTHD06-1-4S
04 / 06 Receptacle or plug housing style 04 = receptacle; 06 = plug
1 Single contact position DTHD is a one-position connector family.
12 / 8 / 4 Contact size Size 12, Size 8 or Size 4
P / S Pin or socket configuration P = pin; S = socket

Some products may include additional suffixes or modifications. When a complete part number contains extra characters, check the exact product specification rather than assuming compatibility from the base number alone.

For broader part-number guidance, read How to Read Deutsch Connector Part Numbers.

How to Choose a DTHD Connector

Choosing the correct DTHD connector is mainly a matter of matching the single circuit, contact size, housing side and contact configuration.

1. Confirm that the circuit should use a single-position connector

DTHD is intended for one electrical circuit per connector pair. If you need several circuits grouped together, compare another Deutsch connector family instead.

2. Choose the required contact size

Determine whether the circuit and selected terminal require the Size 12, Size 8 or Size 4 DTHD contact system.

For electrical-load selection, use the Deutsch Connector Current Rating Guide rather than choosing solely from the family name.

3. Choose plug or receptacle

Identify which mating half you need:

  • DTHD04 = receptacle pattern
  • DTHD06 = plug pattern

4. Confirm pin or socket configuration

Check whether the housing requires a pin or socket contact configuration and make sure the opposite connector half uses the complementary configuration.

5. Check the exact product variant

Confirm the complete part number, mounting arrangement and any suffix-specific details before ordering. Do not assume that every product with the same basic contact size is interchangeable.

Compatible DTHD Contacts

DTHD housings need contacts that match the contact size and pin/socket configuration of the exact housing.

DTHD contact compatibility by housing contact size.
DTHD housing size Required contact size Contact configuration
Size 12 DTHD Size 12 Pin or socket according to the housing part number.
Size 8 DTHD Size 8 Pin or socket according to the housing part number.
Size 4 DTHD Size 4 Pin or socket according to the housing part number.

Contact size does not by itself tell you the correct wire range. Confirm the exact contact part number and its supported wire specification before ordering.

Browse Deutsch Contacts & Terminals for compatible pin and socket contacts.

DTHD vs Other Deutsch Connector Families

DTHD fills a different role from most of the familiar rectangular multi-position connector families.

DTHD compared with other common Deutsch connector families.
Connector family Typical contact system Connector format General selection role
DTM Size 20 Multi-position rectangular Compact signal and sensor wiring.
DT Size 16 Multi-position rectangular General-purpose wiring.
DTP Size 12 Multi-position rectangular Higher-power circuits where several positions may be required.
DTHD Size 12, Size 8 or Size 4 Single-position connector One larger power circuit requiring its own serviceable connection.

DTHD and DTP can both use Size 12 contacts in suitable configurations, but that does not make the two connector families interchangeable. DTP is a multi-position rectangular family, while DTHD is a single-position connector system.

If you are still choosing between connector families, use the Deutsch Connector Selection Chart.

DTHD Connector Buying Checklist

Use this checklist before ordering a DTHD plug, receptacle or contact.

DTHD connector checks before ordering.
Check What to confirm Next step
Connector family DTHD is the correct family for the application. Browse DTHD Series
Number of circuits The connection requires one electrical position. Compare another family if multiple circuits are required.
Contact size Size 12, Size 8 or Size 4 is correct for the selected circuit and contact. Connector Sizes Guide
Housing side The required part is a DTHD04 receptacle or DTHD06 plug. Confirm the mating half.
Pin / socket configuration The selected housing and mating half use complementary configurations. Browse contacts
Wire compatibility The exact contact supports the wire being terminated. Check the contact specification.
Mounting / variant The exact housing configuration suits the installation. Check the complete product specification.

FAQs: DTHD Series Connectors

What is a DTHD connector?

A DTHD connector is a single-position Deutsch connector used for one heavy-duty power circuit. The family is available around Size 12, Size 8 and Size 4 contact systems.

What does DTHD stand for?

DTHD identifies the Deutsch DTHD connector family. When selecting a product, use the full part number to determine the housing style, contact size and pin or socket configuration rather than relying on the family name alone.

Are DTHD connectors single circuit?

Yes. DTHD is a single-position connector family, with one electrical contact per housing.

What contact sizes do DTHD connectors use?

DTHD connectors are available for Size 12, Size 8 and Size 4 contacts. The housing and contact size must match.

What is the difference between DTHD Size 12, Size 8 and Size 4?

The number refers to the contact size used by the connector system. Size 12, Size 8 and Size 4 DTHD housings require their corresponding contact sizes and are not interchangeable.

Is DTHD04 a plug or receptacle?

DTHD04 identifies the common receptacle housing style within the DTHD Series.

Is DTHD06 a plug or receptacle?

DTHD06 identifies the common plug housing style within the DTHD Series.

What do P and S mean in a DTHD part number?

P identifies a pin-contact configuration and S identifies a socket-contact configuration. The mating connector needs the compatible opposite contact configuration.

Is DTHD the same as DTP?

No. DTHD and DTP are different connector families. DTHD is a single-position connector system available around Size 12, Size 8 and Size 4 contacts, while DTP is a multi-position rectangular connector family built around the Size 12 contact system.

How do I choose between DTHD and a multi-position Deutsch connector?

Choose based on the circuit layout first. DTHD is intended for one circuit per connector pair. If several circuits need to travel through the same housing, compare an appropriate multi-position family such as DT, DTM, DTP or another suitable Deutsch connector system.

Final Recommendation

Choose DTHD when the application needs a single serviceable power circuit rather than a multi-position connector. Start by confirming that one position is appropriate, then select the required Size 12, Size 8 or Size 4 contact system, the plug or receptacle housing, and the complementary pin or socket configuration.

Do not select a DTHD connector from contact size alone. Confirm the exact housing, mating half, contact and wire compatibility before ordering.

Browse DTHD Series connectors and Contacts & Terminals to build the required single-circuit connection.