Start by confirming the number of positions required. The DTP Series is commonly available in 2-way and 4-way connector configurations, with separate plug and receptacle housings that form the mating connection.
DTP Plugs and Receptacles
DTP connector part numbers commonly distinguish between receptacle and plug housings. Before ordering, confirm the exact mating configuration, contact type and any suffix-specific requirements on both halves of the connection.
Use the Deutsch Connector Mating Guide if you need help identifying the compatible mating housing.
DTP Size 12 Contacts
DTP connector housings use the Size 12 contact system. The housing configuration determines whether compatible pin or socket contacts are required, while the exact terminal must also match the wire being terminated.
Contact size and wire gauge are separate specifications, so do not select a terminal from “Size 12” alone. Browse Deutsch contacts and terminals and check the exact product specification before assembly.
2-Way and 4-Way DTP Connectors
DTP housings are available in 2-position and 4-position configurations. Match the position count on both connector halves and select the corresponding DTP wedgelocks and contacts.
A 2-way housing should be paired with the compatible 2-way mating configuration, while a 4-way housing requires the corresponding 4-way configuration.
DTP Connector Mounting and Variants
DTP housings are available in different installation and product variants, including inline and suitable flange-mounted configurations. Extended suffixes can identify changes to sealing, mounting or other product-specific features, so verify the complete part number rather than relying only on the DTP04 or DTP06 base.
DTP Connectors vs DT and DTM
DTP is part of the same broader sealed rectangular connector ecosystem as DT and DTM, but the families use different contact systems and are intended for different circuit requirements. DTP commonly uses Size 12 contacts, while DT commonly uses Size 16 and DTM uses Size 20.
If you are deciding which family best suits a harness, read DT vs DTM vs DTP Connectors or the DTP Series Connectors Explained guide.
Complete a DTP Connection
A connector housing is only one part of the assembly. Depending on the exact configuration, a complete DTP connection can also require compatible Size 12 contacts, wedgelocks, backshells, seals or other accessories.
Browse DTP Series Parts to view compatible housings and supporting components together.